Quest

Quest Vehicle Connector to suit Screen House 4 Pro

£197.74 £135.95 SAVE £61.79

May Bank Holiday Weekend Starts in

%-D%!D:Day,Days; %-H%!H:hour,hours; %-M%!M:min,mins; %-S%!S:sec,secs;
SKU: SH505
Barcode:
Availability: In Stock Pre order Out of stock

Connect your Screen House 4 Pro directly to a campervan or motorhome with the Screen House connector kit.
Designed to connect to your vehicle by simply zipping on to the existing accessory zip providing you with a tunnel connector with two side doors.
Suitable for vehicles with a rail height between 180 - 210cm
NOTE: This item is for the connector kit only and doesn't include the Screen House 4 Pro which is sold separately.

Ask a Question
Full Details

The connector features double beading (4 and 6mm) on to allow fitment into an awning channel, or use with a drive away kit, the vehicle connector can also be used on its own on your vehicle to give you a sheltered cover over your door and can even have the canopy zipped to the front of it to give you a canopy and cover over your door.

The fact that the tunnel zips on and zips off means that you do not need a drive away kit when used with a roll lout canopy. This makes it easier to fit as you simply slide the tunnel itself into your awning channel/roll out canopy and do not have the extra work of sliding a drive away kit on and then your tunnel onto the drive away kit.

Also, by removing the need for a drive away kit it means that you get a better fit and performance. This is done because when you attach a drive away kit to your vehicle and then the awning to the drive away kit it adds an extra 10-15cm onto the fitting which pushes your awning away from the vehicle. By attaching the tunnel directly to the channel, you get a closer and better fit. You also get weather performance due to the fact that a drive away kit is made up of multiple pieces of figure of eight which can let water in, whereas by fitting directly to the channel/roll out canopy you remove the need for these, thereby giving you a better performing connection in the wet.

Features

  • Fits: Quest Screen House 4 Pro
  • Zips straight onto Screen House 4 Pro
  • Zip Covers
  • Two Doors
  • Roof Arch Pole
  • Tension Elastics
  • Tension Straps
  • No need for Drive Away Kit
  • Double beading
  • Can be used on its own as a canopy

Materials and Dimensions

  • Vehicle Connection Height: 180 - 210 cm.
  • Size: 100 x 240 x 180 - 210 cm.
  • Weight: 11 kg.